UkWarriorsGym

How Do You Set Your Distortion Pedal?

13 Feb

Setting your distortion pedal has been passed over generations as a way of gaining highly and depending mostly on the distortion as a staple way of a playing style. The need to know how to set your pedal is passed over so as to achieve the best sounds that you find pleasing.

The usefulness and distortion is nowadays limited

A pedal distortion setting

Match your distortion knob level with the master volume on your amp. With this you will have an overdrive or some edge to your tone.  You can clean the approach to your playing which is an ideal setting. It avoids a noisy and over saturated music.

Leaning towards the low end

A distorted tone has to have a thick quality to it which sounds heavy having that low end opposing it to high. So if you are gaining a lot of gain, find for a full tone to house the distorted signal. For a distortion pedal, ensure the setting of the pedal cannot fight the opposing tone on the amplifier.

The amp has the first say on the direction of the tone. Try to adjust your amp then work on to your pedal so as to compliment. Make sure that the setting of your amp and pedal are consistent. The volume should match that of your amp. The distortion setting pedal should enhance and compliment the tone of your amp.

Set by adding a definition to your delay

Setting your distortion pedal adds more value to the sound that is gotten from the delay. An enough distortion to a delay will give that extra boost. The sound becomes thicker heavy and responses well than what you would hear through a perfect clean channel.

How should you start?

Start by cleaning the amp signal using a good bass tone. Use the distorted pedal with the modest amount of gain dialed in. You can opt to delay the rhythm placed before the distortion in the effects chain.

There are things that you need to look for while setting up your new distortion pedal. Check that the gain should never be too saturated. The capability of sustenance should be limited and the sound should have a noticeable amount of distortion with an almost clean sound.

A heavy distortion will mess the sounds badly. It can be from too much sustaining which is needed to be low. Choosing to spend a trial or error test is also good as you try to figure out for something that works. Record down your settings or use the pedal to make notes.

A distortion level which is multiple

A variety of volume can do you good in gaining your distortion level. You can decide to have more established sound but with a distortion level that has two consistent sounds can be more appreciated in to a wider range of music. It can benefit you to handle the tracks of your guitar within the individual songs.

Conclusion

Learning every step to set your pedal helps you more to know how to use your apparatus with ease. Setting is not difficult if trained and practice it after being taught. This helps you to avoid the irritating sounds in your room. It is an incredible feel when you know how to set your pedal.

Leave a Reply

Your email address will not be published. Required fields are marked *