Car Battery Care Tips

25 Nov

Every car owner knows that car batteries are no pushovers. Well, with the exception of manufacturers who are lagging behind in terms of build and overall product quality, of course, which is why car owners should definitely check for product reviews and car battery buying guides on the Internet before spending on a new one. On that note, buying a new battery is something inevitable for vehicle owners. Sure, batteries can be charged over and over, but every single charge cycle deteriorates its overall capacity, leading to it needing replacement.

The average serviceable life of a car battery is around four years. But those that can hold larger charges, ones that have bigger ampere hours, may be able to last a full year more. However, in most cases, batteries can last even longer if taken care of properly. Conversely, it may conk out way below its life expectancy if the car owner doesn’t bother taking care of it. Here are some important tips on how to extend the life of a car battery.

1. Clean connections from time to time.

This doesn’t have to be a weekly or a monthly thing. Overall, it depends on the car owner’s assessment on whether the connection is starting to collect dirt and will have to be cleaned. It’s easy enough to spot. And even easier to remove the clamps connected to the battery. A connection that has dirt build-up can compromise the battery’s performance.

2. Secure it in place.
It’s simple enough to do yet there are still car owners who are careless enough to leave their car batteries in a rather wobbly position. It’s every car owner’s responsibility to ensure that mishaps due to untimely failing of batteries are avoided. It doesn’t take that much effort to do anyway.

3. When using solar power to charge, get a monitor.

Unlike cellphone batteries that come with circuitry that shuts down energy input when the battery is fully charged, car batteries don’t have that luxury. Charging car batteries with solar energy is especially risky because it takes too long to finish. Humans don’t have that much patience to work with, so there’s a risk that it’s going to be forgotten. Get a monitor to, well, monitor the charging process and have a clear estimate on when it’s going to be fully charged.

4. Garage – use it.

It’s perfectly normal to leave the car out in the open when it’s not going to be there for half a day. Obviously, leaving it outside for the entire evening doesn’t make any sense if the garage itself is empty. That’s plain irresponsible. The elements can add wear and tear to the vehicle, especially during peak of summer and winter. The car and the battery are going to thank the owner for taking it inside the garage as much as possible. Well, not literally anyway. It’s also worth it to remember to check your battery before winter kicks in to make sure it’s not in bad shape beforehand.

Are You Looking for the Best Gaming Chairs?

24 Nov

Gaming chairs can be quite expensive. And if you are not careful enough, you might end up not getting the most in your investment. So, here are some tips on what to look for when buying one:


Comfort must be your top priority


The chair’s ergonomics is important. This determines its level of comfort and its ability to avoid straining your body. Obviously, you wouldn’t want to stop your game every 10 minutes since your back sores because of the uncomfortable and clunky gaming chair that you are use.


Opt for the best materials


As they say; “you only get what you have paid for”. Hence, you can’t expect a cheap chair with low build quality to last long. If you want to protect the money that you will invest, better choose a chair with high quality materials. This keeps you from buying a new chair from time to time since it can last for years of use. So, check out its cover material, padding material, legs and other parts if they are made for robust use.


Space saving feature


If you live in a home with a very limited floor area then the chair’s ability to take up space is one of your major concerns. So, choose a chair that you can easily tuck away or fold up.


Coolness Factor


If you want to flaunt your chair to your friends then the coolness factor is very important. Choose the type that will surely stand out. Tailoring the chair according to your taste and preference can help.


Check its value


The most expensive gaming chair doesn’t always have to be the best. Why invest on a chair with features that will not be useful for you? For instance, if the chair is already equipped with a good sound system then why pay extra for speakers and subwoofers?


System Compatibility


This is very important since the last thing you want to discover is buying for an expensive gaming chair that is not compatible with your gaming system. This is just like draining your hard earned cash to the kitchen sink.


Be mindful of the size


Take note that gaming chairs come in various sizes. Hence, if you have passed your boyhood years and is still remain a hard core gamer, make sure that you buy a chair designed for adult’s use. You wouldn’t want to end up buying a smaller one that you can even barely fit into.

Let’s face it; gaming has become a multi-million industry these days. A lot of people have joined are not on this only for fun but for competition as well. So, if you want to excel and do well in your games, use the best gaming chair to improve your gaming performance. Most importantly, it will help you enjoy doing the things you love most in life. Just make sure that you choose the one that caters to your needs best. Check out for great chairs for serious gamers. Surely, your life will be better if you have one of them around.

Effective Ways to Clean Pots and Pans

23 Nov

Though some people like cooking and everybody loves eating, not everyone is excited to do the dishwashing that comes afterward. One of the terrors of dishwashing is getting to the part where you need to wash pots and pans that were burnt or scorched. The dishwasher would not just do the trick and you would need to wash them by hand. At times, you just have too many dishes that they all won’t fit in the machine. Luckily, this article will give you some tips to deal with removing burnt food and more from pots and pans. Check them out below.


1st Tip: For burnt food stuck at the bottom, heat the pot or pan.


You might have forgotten to stir the food and just let it boil. This would cause some of the food particles to get burnt and stuck at the bottom of your pot or pan. Scrubbing it too hard might damage it and would leave some unwanted scratch marks on your pot or pan. To avoid damaging it, put the pot or pan back on the stove and put some water in it, just enough to cover the bottom. Turn the heat on high and let it boil. The heat and water would loosen the food and would make it softer. It would then be easier to scrape the stuck burnt food using a rubber or wooden spatula or spoon. This works best for stainless steel and non-stick pans and pots.


2nd Tip: Soak your pots and pans before washing.


Some cookware is sensitive to detergents and also scrubbing. But, at times, you can’t avoid using strong dishwasher detergents and scrubbing them too hard because of the stuck food at the sides and the bottom. The best way to deal with this is to soak them in water for a few hours or overnight. You can add a bit of dish soap in the water to help remove the grease. Use a non-scratch sponge to wipe off the remaining particles that are still on the pans or pots.


3rd Tip: Use baking soda and vinegar for your roasting pans.


Baking soda and vinegar are two of the most useful ingredients to have in the house. Not only could they be used in some of your cooking, they can also be used in cleaning. Most people use them separately to clean rugs and remove stains from their walls and floors. But, using them together would be even more effective especially in removing stuck food from your pan. Just sprinkle some baking soda on the surface of the pan. Then pour vinegar solution (1 cup hot water: 1/3 cup of vinegar) onto the baking soda. The reaction of combining those two would remove the particles from the pan.


4th Tip: Don’t put your cast iron pots and pans in the dishwasher.


In case you use some cast iron cookware, never put them in the dishwasher just because you are too lazy to scrub them. Also, don’t use any detergent to wash it. Just simply use hot water, or boil water in it to loosen the food particles and then brush. Dry it with a paper towel and, while the pot or pan is still warm, apply a bit of vegetable oil on it. You can click here for more amazing tips.

Protein Shake Intake Timing

20 Nov

Protein shakes are becoming very popular nowadays especially for athletes and bodybuilders. That is due to the fact that they have shown to be effective in helping make muscles bigger, leaner, and stronger. They are also capable of giving the same benefits that people received when consuming a protein-rich diet.

Generally speaking, in order to produce a protein shake, people should have a protein powder. As an overview, it is a product that is manufactured by separating and filtering compounds in order to extract the right and specific type of protein that is needed. After which, some ingredients are also added and they are made into a powder. Such powder is then dissolved in a glass of water or another form of liquids like juice. After which, the solution should be placed in a blender or shaker in order to have a smooth and easy-to-consume protein shake.

The thing is that protein powder brands have different recommendations on when to take the protein. Nevertheless, some common recommendations can be observed and this article will be discussing some of which below.

Upon Waking Up

Protein shakes are recommended to be taken immediately after waking up or at least 30 minutes after waking up. That is because the body has not been nourished with food for a long period of time, which is the hours of sleep taken. By consuming a glass of protein shake, the balance of body protein will be maintained at a positive level. According to some studies, protein shakes taken in the morning can also help in suppressing the cravings for sweet food, as well as for controlling appetite.

Before Going to Bed or Sleep

Some experts also suggest that people should take protein shakes a few minutes before they hit the sack. Through such, the body muscles will have enough amount of protein during sleep. Thus, muscle breakdown can be limited and protein production can be increased. This is very beneficial especially during training days. In addition, it is also believed that when there is a high level of protein during sleep, the amount of fat lost also increases.

Before Undergoing a Workout Regimen

Consuming a protein shake before working out will provide the body with high levels of energy. Hence, the user will have better endurance, which is helpful in increasing the amount of time spent in the gym. Likewise, with high levels of protein prior to working out, protein breakdown will be lessened and protein synthesis is enhanced. According to some experts, the best time is at max 40 minutes before a workout. However, individuals who have recently taken a high-protein meal before going to the gym no longer need to consume a protein shake.

After Working Out

Most brands of protein powder products, like , recommend that one serving of protein shake must be taken within 30 or 45 minutes after working out. That is due to the fact that high levels of protein can enhance muscle tissue repair and recovery. Likewise, after a series of cardio and weight lifting exercises, the breakdown of muscle protein is most likely increased. Hence, in order to counteract such, individuals should increase their protein levels.


Finding the Right Lawn Mower for You

18 Nov

These days, a lot of people are trying to make their house as pleasant looking as possible. This is the reason why people invest in additional home features like landscapes and hardscapes. These make houses look fabulous and presentable but maintaining it can be quite hard. Some people get services from companies but if you try to think of it on a long-term basis, this may cost you a lot. So what could be a sound alternative for those who do not have a lot of budget for services like that? Getting a lawn mower of their own can cut them a lot of costs. Lawn mower maintenance is fairly easy as long as it is used properly. If you are planning on getting one for your home or business, you can check out a lawn mower review to narrow down your options.

Set a budget

To make you more efficient and to avoid being overwhelmed with dozens of choices in the market, you have to set a budget. Once you come up with a specific price range, you get to choose only among those that fit it. As long as you keep yourself informed of the different kinds, types, and features that contribute to the lawn mower’s price, your chances of buying the wrong one are lessened tremendously.

Know what you need

There will be lawn mowers that are electric and gas powered. For those who like a quieter experience, this can be a good choice. It is eco-friendly and as long as you keep your batteries on check, you are good to go. If you are after efficiency, you can go with the gas-powered lawn mower. They spend less energy and can easily handle wet surfaces than electric ones. These two types come with different pros and cons so before buying one, know what you need and choose accordingly.

Additional features

If you are down to making your experience a better one, you can consider looking at additional features you can get from lawn mowers. Innovative creators made cup holders, sun shades, cruise control and CD players available. Maintaining your lawn does not have to be a boring experience. Spice it up and add one or all of these additional features to make the most out of your time.

Maintaining your lawn mower

Just like any other automobile, you need to take care of your unit to make it last for a long time. Keep your blades sharpened to make sure your glass looks clean and even. Check your tires because low pressure on the tires can increase energy expenditure. High tire pressure can make it prone to bursting when ran down on a sharp object. Looking for a lawn mower is fairly easy if you know where to get the right information about it. Always go for quality because this will impact your overall experience. And since you will be using your unit often, you have to make sure that it is something that will give you your money’s worth.

Bathroom Remodelling Ideas: Top Bathroom Renovation Mistakes That You Need to Avoid

17 Nov

The bathroom is one of the most important, yet dangerous places inside the house. However, it is also one of the places that are given with least consideration when it comes to safety. As a result, the numbers of accidents have been reported due to human miscalculations or due to the bathroom’s design and style. In fact, according to the statistics, most bathroom falls or slips are caused by the incorrect placing of tubs, walk-in showers and more. Where there are 65.8 percent injuries occurred within the shower or tub area and 22 percent of injuries happened near the toilet. If you are planning to remodel your bathroom or most of your house’s restroom, you need to remember the following renovation mistakes, to avoid unnecessary accidents in the future.


Mistake #1: Unclear view in and out


One of the clear mistakes with bathroom renovation is having an unclear circulation. If you are too worried about all your ideas will not fit inside the small-sized bathroom, you can always find some great ideas for a small-sized bathroom that has good circulation from the main door to the walk-in shower area. For instance, make it a point that the bathroom sink or your lavatory will not affect the view of going in and out of the bathtub or the walk-in shower area; this may cause accidental slips leading to injury. Make sure to plan the spaces thoroughly for each bathroom parts.


Mistake #2: Adding unnecessary wall decors and storage area.


Admit it or not, most women love to bring all their girl stuff inside the bathroom including hair blowers and hair iron, which can be very dangerous, especially if the bathroom is not that big enough. If you want a bathroom to be safe and spacious at the same time, make sure to minimize adding storage. Carefully plan for a bathroom style and do not think about adding a make-up mirror inside your small-sized bathroom, it will only fill up most of the space.


Mistake #3: The problematic drainage and poor ventilation


One of your main priorities in maintaining the bathroom area is to keep mold from building up and to keep the drainage from clogging. However, some homeowners tend to forget that the used water has to go somewhere and the bathroom must be properly ventilated.


Mistake #4: Choosing shower system for the style and not for function.


When remodeling the bathroom, the shower system is often underrated. Admit it or not, it is still a fact that several homeowners would choose stylish shower system over its functions. Do not waste your money on something that is not-worth-it, or you may take a look these good examples of shower system to help you choose the right one for your walk-in shower area. There are still more bathroom renovation mistakes that you need to know if you are planning to have a new set of the bath area and toilet area. Here is a simple yet important advice when planning for one, always think about safety, convenience, and space.

Why a Massage Chair Is Important for the Home

16 Nov

It’s highly unlikely for anyone to believe, upon reading for the very first time, any article that says that sitting is just as dangerous as smoking and certain drug addictions. Of course, it is still a case-to-case basis as some smokers and drug abusers are far off into their addiction that no amount of sitting can match the detriment they did to their body. But that’s beside the point. Sitting for long periods, which are exactly what practically everyone these days do, is detrimental to health, much so that its effect isn’t only on the spine itself but also to the heart and immune system.

Fortunately, there are ways to counteract the ill effects of sitting down for long periods of time. One of the best ways to do so is to massage the back regularly. For the best results, it would be better for it to be done by a massage therapist. But then again, going to a massage therapist for regular sessions is somewhat inconvenient and costly. Instead, it would be much better to just buy a back massager. Sure, back massagers may not be able to meet the level of back relief a therapist does, but it makes up for it quite well with its convenience and accessibility. However, the very notion that back massagers are not as good as a therapist’s service is not always true. The best back massage equipment in the form of a massage chair proves to be an equal in terms of providing back relief.

It would seem ridiculous that a chair, a fixture that’s ubiquitous to the act of sitting down, is the very thing that can offset the damage done by sitting. However, massage chairs aren’t designed to be as unforgiving to the spine as regular chairs. First off, its reclined structure provides a better distribution of weight. Also, massage chairs are more comfortable and cushiony than some of the most expensive office swivel chairs. Check out blog sites that feature massage chairs and how it works, they’re definitely worth the read.

To address the elephant in the room – yes, massage chairs do require a bit of money to own. But from a practical perspective, it’s worth buying because it saves more money in the long run compared to going to a massage therapist on a regular basis. Financial gurus will keep yammering about avoiding spending on superfluous and luxury items. And with the effect of a massage chair being undoubtedly luxurious and relaxing, it’s easy to categorize it as anything but a necessity. However, considering that sitting has become a modern-day sickness, who’s to say that a device that reverses its ill effects is a luxury? Buying one is just like buying a portable water filtration system for the family. It’s all about the health benefits more than its initial cost of purchase.

Regardless of its benefits, it’s absolutely important to do some research before buying from the local store or ordering one from the Internet. There are plenty of reviews on the Internet to help buyers in this regard.


Mattress Guideline: How to Choose the Right Firmness of the Mattress

16 Nov


It is nice to know that when it comes to mattresses, there are lots of options to choose from. However, choosing among the numerous brands can be tough, especially if you are talking about comfort or the firmness of the mattress. The quality of firmness of the mattress will determine the quality of your sleep. In fact, several doctors and sleep experts have agreed that the quality of the mattress can impact the person’s quality of sleep. Also, they love to stress out that when choosing for the right bed, you have to choose the ones that can reduce the pressure points on your body when you sleep and the one that could give you a better rest. Choosing the right mattress does not require you to choose the most expensive one because there are good mattresses under $500. Also, the firmness of the mattress can be subjective. Hence, to help you chose the right one for you; here are some tips on how to choose the right mattress firmness that will be best for you.

  1. Know your preference

When you talk about the mattresses’ firmness, it simply boils down to your reaction when you first try the mattress. Also, when choosing the right mattress, your own personal views matter. For instance, are you comfortable lying down on the mattress and does it offer a cloud-like comfort? Do you feel more relaxed on a mattress that is a bit firmer? Do you easily fall asleep on a balanced mattress; meaning not too soft and not too firm?

  1. Know the firm rate

When it comes to firmness, mattresses are often rated from 1-10. According to experts, the higher the rate the firmer it is. Also, do not get confused with the “universal comfort mattresses”, because most of these are made to provide almost everyone’s needs. Also, these mattresses’ comfort is usually rated 5 out of 10, which means the universal mattresses have a medium feel of comfort. However, when choosing the right mattress, do not choose other people’s preferences but yours. So, choose what you think is comfortable.

  1. Choose the firmness that will fit you and your partner

The right firmness and the size of the mattress shall determine your definition of “comfort”. If you sleep alone, you may choose the size that will fit you alongside with its offered comfort. However, if you have a bed sharer, you need to choose something that will satisfy your needs and your partner’s needs. If you are having trouble choosing the right one because your partner likes it firm, while you need the softer one, or simply because you and your partner have no idea what to choose, then why not choose the universal comfort mattresses? It will be a guaranteed solution to both of your sleeping problems.


Choosing the right firmness of the mattress should not be taken lightly because the firmness of the bed will determine the comfort that it offers. Also, if you want to know everything about mattresses, you may check Sensei Reviews’ website anytime.


Tips for Ironing

15 Nov

Chores do not end in doing the laundry. There is still ironing that needs to be done before putting the clean clothes in the closet. Check out the tips that follow to make ironing faster and better. You can also see more about ironing at

  1. Sort the clothes

Sort your clothes depending on the needed temperature you need to iron them. Start ironing the clothes that require lower temperature first and move up to the next, waiting for the iron to heat up for a minute or two before after changing the temperature.

  1. Increase the heat

By using an aluminum foil under the cover of the board, you would be able to double the heat that is given to the fabric you are ironing. You would be able to iron both sides of it at the same time because the foil will reflect the heat from underneath.

  1. Straight strokes

Some of you may have tried ironing in a circular motion, thinking that it would not make a difference. But, it does. The movement could damage the fibers of the fabric by stretching them. It is important to make straight strokes when ironing to protect the cloth and let it have a longer life.

  1. Let it cool

Wearing a shirt immediately right after you’ve just ironed it would put your hard work to waste. Letting the shirt cool for a few minutes before wearing it would give the fabric some time to flatten. Hang it up to prevent any outside factor from wrinkling it again while it cools down.

  1. Wet it

Ironing is best when the fabric is still a bit damp. Sprinkle some water with a spray bottle or you can use a steam iron to get rid of wrinkles easier. Aside from just removing creases effectively, spraying some water and vinegar solution could be helpful in getting rid of yellowish color at the underarm area and collars.

  1. Extend the board


If the material you are ironing is too big for the ironing board – like sheets and tablecloths – you can put a stool that is shorter than the board at the end of it where part of the cloth that you just ironed can be laid out. This would prevent it from getting wrinkled when it touches the floor. You can also use a clean table as an ironing board.

  1. Inside-out

Iron clothes that have designs that may get damaged when direct heat is applied, inside out. You might also try putting a clean cloth underneath or between the front and the back part to prevent some sensitive prints from sticking to the other part of the clothing.

  1. Clean water

When using a steam iron, it is recommended to use clear or even distilled or boiled water, to avoid getting deposits on the clothes. This would also prevent the iron from being clogged due to accumulated water particles.

  1. Clean

Your iron needs to be cleaned regularly. Dirty irons would damage the fabric and may be the cause of some stains.


Substantial Triathlon Gear

10 Nov

One of the most important in preparing for a triathlon is getting the right gear. Since you would be swimming, running and cycling, you would need more than just a pair of shoes and clothes. Here are the top must-haves for a triathlon race.


1. Bike


Any bike will do as long as you are comfortable with it. Just make sure that you use the same kind of bike during training and during the race so you would get used to it. The tires should be checked for air, the chain for oil, and other parts for tightness and safety.


2. Kit


Together with your bike, you should always have a kit prepared just in case you get a flat tire or some malfunctions on your bike that needs to be repaired quickly. You have to be prepared for possible situations and conditions you might be dealing with during the race.


3. Helmet


This is important for your own safety. Besides, the organizers would not let you race if you do not have the right safety gear during the race. Choose a helmet that is not too heavy and something that you are comfortable wearing.


4. Goggles and shades


Sunglasses can be useful when you’re cycling or running in a sunny weather. There are athletic shades that you can get from sports stores that would be perfect for races like this. Also, choose goggles that can be used during sunny days and indoor swimming. You can also have two, just in case.


5. Shoes


Running shoes should be comfortable and can withstand long distances. Do not attempt to wear those with already thinning soles or even buy new ones that you haven’t tried a day just before the race.


6. Hat


You would be running under the sun for miles and it would be better to wear a hat that would help protect you from getting burned. It would also help keep the brightness of the sun from hitting your eyes, especially if you are not comfortable in wearing sunglasses when running.


7. Tri Suit


In order for you to reach the finish line in the least amount of time possible, many experts recommend getting a tri-suit instead of getting different suits for the three different legs. Changing from your wetsuit to your, biking shorts then running shorts would take a lot of time. Most tri suits are made of fabric that dries easily and would make the bike ride more comfortable.


8. Triathlon bag


You would need a place to keep all your stuff while you swim, bike and run. A triathlon transition bag would help you keep all of your things in order during the race day without you worrying about them getting scattered around. You can check out these top triathlon bags here.


9. Towel


Surely you would need something to dry you up before you go on your bike. This would also serve as a mark for you to easily spot your bike when you come out of the water.


10. Water bottle


Choose a bottle that would fit perfectly on your bike and also one that you can take with you during the run if you choose to.